If you would like to be notified when new watches are added to this website, please Click Here to be added to my mailing list
|
Manufactured exclusively for Time Factors by the manufacturers of the "Aviator" and "Rally" straps.
Specification
- Genuine leather with nubuck backing
- Self coloured stitching
- 2.75mm thick
- Buckle side is 62mm long and the "hole" side is 125mm*
- Available in 19, 20& 22mm; 19 & 20mm straps are fitted with a 18mm buckle, 22mm with a 20mm buckle. Black and brown available in all sizes
- The backing pad measures 78mm x 44mm on the 19 & 20mm straps, 85mm x 54mm on the 22mm*
- The 19mm strap only is of the open-ended type for fitting to watches with fixed bars and secured with fold-over metal tabs
- Brushed stainless steel buckle
- "Timefactors" and "Genuine Leather " stamped on the underside of the backing pad
- Rated "showerproof"
*Whilst every care has been taken to measure accurately, due to manufacturing tolerances all quoted measurements are approximate.
Click on any of the thumbnail images below to enlarge then mouse over left or right edge to view slideshow
Product ref: Time Factors Bund Strap- £14.00 |
In Stock |
|
|
Time Factors Calf Leather Ostrich Grain |
|
This is the identical strap which was supplied on the PRS-20 "Italian" Limited Edition but with plain buckle instead of signed.
Specification
- Calf leather with ostrich grain pattern on nubuck backing
- Rice coloured contrast stitching
- 2.75mm thick
- Buckle side is 80mm long and the "hole" side is 120mm*
- Available in 20, 22 & 24mm; 20 & 22mm straps are parallel, 24mm tapers to 22mm at the buckle
- Polished stainless steel buckle
- "Timefactors" and "Genuine Leather " stamped on the underside of the strap
- Rated "showerproof"
*Whilst every care has been taken to measure accurately, due to manufacturing tolerances all quoted measurements are approximate.
Click on any of the thumbnail images below to enlarge then mouse over left or right edge to view slideshow
Product ref: Time Factors Ostrich Grain Strap - £14.00 |
In Stock |
|
|
Time Factors CANVAS Strap 18, 20 & 22mm |
|
Introduced following strong demand from customers for an alternative to leather.
Specification
- 100% natural cotton construction with two fixed keepers and reinforced holes
- Brushed stainless steel buckle
- The buckle side is 75mm and the "hole" side is 115mm so depending on the size of the watch head, will fit a 8 - 8.5 inch (200 - 210mm) wrist*
- Available in Navy Blue, Parachute Regiment Red and Sand colours in 18, 20 and 22mm
Features
- Lightweight
- Comfortable
- Washable
- Hypo-allergenic
- Suitable for Vegans
- Biodegradable
*Whilst every care has been taken to measure accurately, due to manufacturing tolerances all quoted measurements are approximate.
26 August 2010: 20mm black & 20mm olive out of stock.
Click on any of the thumbnail images below to enlarge then mouse over left or right edge to view slideshow
Product ref: Time Factors CANVAS Strap - £5.00 |
In Stock |
|
|
Time Factors Open-Ended "Aviator" Strap |
|
After two years of disappointment and unrealistic price quotations, I finally found a manufacturer who would make this quality flieger-style strap without breaking the bank. Make no mistake, the quality of this strap is equal to straps costing double the price or more.
Open-ended to fit the older aviator watches with fixed bars, will also fit watches with screwed bars and regular springbars. The 18 & 20mm are fitted with one screw each side and the 22 & 24mm have two screws each side. The screws are solid 316 stainless steel, not plated base metal
Specification
- Cut edge open-ended construction, secured by domed screws as illustrated
- Black or brown calf leather with nubuck backing
- Contrast stitching, squared off at the lug end
- 3.5mm thick, unpadded
- Buckle side is 80mm long and the "hole" side is 115mm (will fit up to a 9 inch wrist)*
- Available in 18, 20, 22 & 24mm black and brown
- Brushed stainless steel buckle
- "Timefactors" logo stamped on the underside of the strap
The leather is a medium-soft quality natural leather in black and chestnut brown. As with all natural hide products, the pattern of the grain will vary between straps.
All straps taper 2mm to the buckle, i.e. 24 > 22mm, 22 > 20mm, 20 > 18mm & 18 > 16mm.
*Whilst every care has been taken to measure accurately, due to manufacturing tolerances all quoted measurements are approximate.
Click on any of the thumbnail images below to enlarge then mouse over left or right edge to view slideshow
Product ref: Time Factors "Aviator" Open-Ended Leather Strap - £12.50 |
In Stock |
|
|
Time Factors "Aviator" Open-Ended "Special" 24mm |
|
Exactly the same construction as the Aviator parallel straps listed below but not manufactured to specification inasmuch as they should have been 24mm parallel with two screws each side and fishtail buckle. Somewhere in the manufacturing process they mixed the specification for the 24mm parallel and the 20mm open-ended which I ordered at the same time. They are in no way sub-standard or defective, just not what they should have been. I negotiated a reduction in price because they aren't to specification so grab youself a bargain while stocks last.
Available in 24mm brown only at £10 each or buy TWO for £18.
Click on any of the thumbnail images below to enlarge then mouse over left or right edge to view slideshow
Product ref: Time Factors AVIATOR O/E "SPECIAL" - £10.00 |
Limited number in stock |
|
|
Time Factors "Aviator" Parallel Strap with Fishtail Buckle |
|
Exactly the same general construction as the Aviator open-ended above but a parallel strap fitted with large "fishtail" buckle.
Specification
- Cut edge, closed-end construction
- Black or brown calf leather with nubuck backing
- Contrast stitching, squared off at the lug end
- 3.5mm thick, unpadded
- Buckle side is 80mm long and the "hole" side is 115mm (will fit up to a 9 inch wrist)*
- Available in 20, 22 & 24mm black and brown
- Brushed stainless steel fishtail buckle and 3mm wide tang
- "Timefactors" logo stamped on the underside of the strap
The leather is a medium-soft quality natural leather in black and chestnut brown. As with all natural hide products, the pattern of the grain will vary between straps.
Single screw in the 20mm and two screws in the 22 & 24mm.
*Whilst every care has been taken to measure accurately, due to manufacturing tolerances all quoted measurements are approximate.
Click on any of the thumbnail images below to enlarge then mouse over left or right edge to view slideshow
Product ref: Time Factors "Aviator" Leather Strap - £14.00 |
In Stock |
|
|
Time Factors "Aviator" Strap |
|
Exactly the same general construction as the Aviator open-ended above but with closed end and no screws. This strap is more in the style of the Hirsch Liberty.
Specification
- Cut edge, closed-end construction
- Black or brown calf leather with nubuck backing
- Contrast stitching, squared off at the lug end
- 3.5mm thick, unpadded
- Buckle side is 80mm long and the "hole" side is 115mm (will fit up to a 9 inch wrist)*
- Available in 18, 20, 22 & 24mm black and brown
- Brushed stainless steel buckle
- "Timefactors" logo stamped on the underside of the strap
The leather is a medium-soft quality natural leather in black and chestnut brown. As with all natural hide products, the pattern of the grain will vary between straps.
All straps taper 2mm to the buckle, i.e. 24 > 22mm, 22 > 20mm, 20 > 18mm & 18 > 16mm.
*Whilst every care has been taken to measure accurately, due to manufacturing tolerances all quoted measurements are approximate.
Click on any of the thumbnail images below to enlarge then mouse over left or right edge to view slideshow
Product ref: Time Factors "Aviator" Leather Strap - £12.00 |
In Stock |
|
|
Time Factors Carbon Strap |
|
Following the demise of the Hirsch Carbon, I had these made to satisfy the constant stream of enquiries for a padded carbon with contrast stitching.
Specification
- Remborde construction
- Leather with carbon pattern on synthetic coating and rubber backing
- Rice coloured contrast stitching
- Padded - 4.5mm thick at the lugs and 2.25mm at the end
- Buckle side is 85mm long and the "hole" side is 125mm (will fit up to a 9 inch wrist)*
- Available in 18, 20 & 22mm; all straps taper 2mm from the lugs to the buckle
- Brushed stainless steel buckle
- "Timefactors" and "Tropical" stamped on the underside of the strap
- Rated "showerproof"
20 & 22mm out of stock. The manufacturer has changed the type of "carbon" used and this new finish is not acceptable. 18mm is still the old stock.
*Whilst every care has been taken to measure accurately, due to manufacturing tolerances all quoted measurements are approximate.
Click on any of the thumbnail images below to enlarge then mouse over left or right edge to view slideshow
Product ref: Time Factors Carbon Strap - £9.00 |
In Stock |
|
|
Time Factors "Rally" Strap |
|
I've probably had more requests for this style of strap than any other.
Specification
- Remborde construction
- Leather with leather backing
- Rice coloured contrast stitching
- Buckle side is 75mm long and the "hole" side is 125mm (will fit up to a 9 inch wrist)*
- Available in 18 & 20mm; both straps taper 2mm from the lugs to the buckle
- Brushed stainless steel buckle
- "Timefactors" stamped on the underside of the strap
*Whilst every care has been taken to measure accurately, due to manufacturing tolerances all quoted measurements are approximate.
1 September 2010: 20mm black out of stock until mid-September.
Click on any of the thumbnail images below to enlarge then mouse over left or right edge to view slideshow
Product ref: Time Factors Rally Strap - £9.00 |
In Stock |
|
|
"Bund" Strap 19, 20 & 22mm |
|
Another strap I am often asked for. Not a Time Factors exclusive but it doesn't really fit on any other page.
The 19mm version is the authentic German issue and German made Bund with the NATO stock numbers stamped into the back of the strap, manufactured by Graf. 20 & 22mm is from the same manufacturer but is not stamped with the NATO stock numbers.
Specification
- Remborde construction black or brown (brown in 19mm only) calf leather with nubuck backing and open ends for fitting to watches with fixed bars3.0mm thick. the 19mm does not taper, the 20 & 22mm versions both taper to 18mm at the buckle. Buckle side is 70mm long and the "hole" side is 130mm (will fit up to a 9 inch wrist)*
- Stainless steel buckle
- The backing pad is 45mm across and 80mm long
*Whilst every care has been taken to measure accurately, due to manufacturing tolerances all quoted measurements are approximate.
All currently out of stock, a new version is expected to be in stock during November 2009.
Click on any of the thumbnail images below to enlarge then mouse over left or right edge to view slideshow
Product ref: Genuine German Bund Strap - £18.50 |
Out of stock |
|
|
|
|